Dolphin Pool Cleaner - User's Guide

Dolphin Dolphin

MyDolphin™ Smartphone app

With FCC ID: WCH99956035

MyDolphin™ is an easy-to-use app for controlling your Dolphin robotic pool cleaner remotely using Bluetooth®. You can activate cleaning programs and the weekly timer, navigate manually, and much more.*
You can install and operate the MyDolphin™ app on all the most common mobile devices and operating systems, iOS and Android, including tablets.

*Smartphone control is available only with specific Dolphin models/year.


MyDolphin™ App Troubleshooting Document

Initial operation

  1. Make sure the Dolphin's power supply is connected to the Dolphin pool cleaner and an electrical outlet, and that the Dolphin robot is in the pool. Upon initial operation, it will perform the self-system diagnostic sequence.
  2. Make sure Bluetooth® is active on your smartphone and download and activate the MyDolphin™ app. Once downloaded, the app searches for and displays the serial number of the nearest Dolphin robot.
  3. Click on the Dolphin serial number displayed on your screen.
  4. Register by entering your email address and creating a password.
    Your smartphone will then finalize the Bluetooth® pairing sequence.



Dashboard screen

Get a quick glimpse of your Dolphin's operational status, and easily set up each of the MyDolphin™ app features.
The top indicator bar shows functional information, including on-off status, signal strength and error notifications.
The main screen window shows the operational status and information and selected
cleaning mode.
The buttons on the lower half of the screen show the available operation modes: cleaning mode, manual drive, cycle time, weekly timer, info/links, and delay mode.manual drive and info/links.


Application features



Weekly timer
You can use the MyDolphin™ app to set the weekly timer on your Dolphin robotic pool cleaner. This unique planning system enables you to create a personalized
cleaning schedule for your Dolphin (per day and hour). Set it for just one week or to repeat on a weekly basis.

Manual navigation
You can use the MyDolphin™ app to manually maneuver your Dolphin into specific areas and corners of your pool, by dragging the handle in the desired directions. In this way, you can quickly and e_ciently clean hard-to-reach spots. You can also switch to Tilt mode for a more playful and realistic experience, and maneuver your Dolphin by tilting the smartphone in various angles.

Clean modes
In addition to the automatic clean mode, the MyDolphin™ app also includes additional clean modes to suit your specific needs. For example, the Floor Only clean mode focuses on the floor of your pool, removing more dirt from the bottom, without taking time to scrub the walls.

Cycle time
This determines the cleaning cycle time. The MyDolphin™ app allows you to choose between the following options: 1.5 hours, 2 hours, 2.5 hours. 1.5 hours, 2.5 hours, 3.5 hours.

Operation delay
The Delay feature enables you to delay the cleaning start time for 1-6 hours. This delay allows the dirt to settle at the bottom of the pool. Note that this is a one-time operation. You need to reactivate the Delay feature every time it is required.



DolphinTech technician's app

DolphinTech is a supplementary app for professionals. With an intuitive interface, it enables dealers and technicians to carry out quick repairs remotely − saving customers hours and sometimes even days of waiting for their Dolphin to get back to cleaning their pools.



©2022 Maytronics