Routine Maintenance
It is recommended to clean the filter bag or cartridges after each cleaning cycle.
There are two options of filtration system: filter bag or cartridge.
*Only one type set is provided with your robot Pool Cleaner.
Cleaning the cartridge filters
* Do not let the filter cartridges dry out before cleaning.
* Unplug the power supply before any servicing activity, including cleaning the filter cartridges.
-
With the pool cleaner upside down
open the bottom lid and pull it out. - Open the clips and remove the filters.
- Clean the filters with a hose.
- Insert the filters with the plastic backing facing out.
- Insert the cartridge unit.
Cleaning the filter bag
-
Turn the Pool Cleaner upside-down. - Open the bottom lid
- Remove the filter bag.
- Clean the filters with a hose.
We recommend that you periodically wash the filter bag in a washing machine using the gentle cycle program. Periodically clean the brushes with a hose. - Put the filter bag over the frame so that the strap is in the middle of the shortest side.
Make sure that filter bag is positioned properly on the frame.
Dismantling and cleaning the impeller
If you notice debris trapped in the impeller, open the impeller and remove the debris, then reassemble. (Use Phillips head screwdriver).
CAUTION - Unplug the power supply before cleaning.