Routine Maintenance
- Make sure the power supply is switched off and unplugged.
- It is highly recommended to clean the filter basket after each cleaning cycle.
- Do not let the filter basket dry out before cleaning.
Cleaning after use - removing and cleaning the filter basket
- Open the filter cover.
- The handle will lift up independently. Lift up the basket.
- Open the latch to release the bottom lid.
- The debris can then be removed.
- Clean the filter basket with a hose.
Filter Indicator
This Dolphin robotic pool cleaner has a unique feature that shows you the filter status, and when its need to be cleaned. This is highly important for the efficient operation of the filter and its preservation over time. The feature can be activated through the MyDolphin PlusTM app.
Periodic cleaning – recommended at least once a month
In addition to cleaning after use you should clean the filters periodically.
It is recommended to do this at least once a month.
When you perform periodic cleaning, you should first dismantle the 4 ultra-fine filter panels of the outer basket, as per the following steps.
- Hold down the handle and remove the inner net basket.
- Dismantle the panels using your thumbs to press on panel 1.
- Continue to dismantle panels 2, 3, 4 in the same manner.
- Clean the filter panels with a hose.
- Reassemble the filter panels in the order 4 —> 3 —> 2 —> 1.
- Insert the clean filter basket and close the filter cover.
Do not force the filters into place.
Periodic cleaning – recommended at least once a month
Dismantle the 2 ultra-fine filter panels of the basket, according to the following steps:
- Dismantle the 2 panels using your thumbs
- Clean the filter panels with a hose.
- Assemble the filter panels.
- Insert the clean filter basket and close the filter cover.
Clean the Impeller
If there is debris trapped in the impeller it should also be cleaned as follows.
CAUTION - Unplug the power supply before any servicing activity.
- Using a short screwdriver open the 2 screws.
- Pull the impeller cover backwards to release it. Clean the debris trapped around the impeller. Assemble the impeller cover.