Setup
*For caddy assembly instructions - see chapter "Caddy assembly"
Before using the Pool Cleaner for the first time perform the following steps
- Position the power supply at approximately the middle of the long side of the pool, at least at a distance of 3.5m /12ft.
- Unwind the cable and stretch it out completely so that it has no kinks.
Connecting the power supply
- Attach the floating cable to the power supply: Insert the cable with the notch on the connector (1), lined up with the groove in the socket on the power supply, and turn clockwise (2).
- Plug in the power supply and leave it in the OFF position.